Ethylene Vinyl Acetate Rubber

Hot melt adhesive is solvent-free, almost odorless, pollution-free, and easy to apply, so it is widely used in many fields. Hot melt adhesive with ethylene-vinyl acetate random copolymer (EVA) as the base resin is one of the most important varieties of hot melt adhesive, which can be used in packaging materials, book binding, wood processing and other industries.   The development of EVA hot melt adhesive in my country began in the early 1970s. In the 1980s, due to the rapid development of related industries and industries such as printing, food and beverage, wood processing, and electronics, various production lines were introduced to stimulate the rapid growth of new product development and production capacity of EVA hot melt adhesive. EVA hot melt adhesive is mainly used in the following fields in my country.   1 Book binding EVA hot melt adhesive is used for wireless binding, which changes the cumbersome processes of threading round backs, gluing, and covering the cover used in the past for binding books with latex, greatly shortening the book publishing cycle and improving work efficiency and book binding quality. 2 Wood processing In wood processing, EVA hot melt adhesive is mainly used in combination with panel furniture edge banding machines for furniture edge banding, which has changed the backward appearance of manual operation in the past, and is easy to fold and assemble, which improves labor efficiency. 3. Clothing lining EVA and EVAL powders are inexpensive and have good adhesion. They are suitable for various coating processes such as powder coating, powder dot coating, and slurry coating. The hot melt lining made of EVA hot melt adhesive can make the clothing beautiful, crisp, non-deformed, and low-cost. 4 Packaging The bonding ability of EVA hot melt adhesive is relatively stable, not affected by changes in temperature and humidity in the working environment, and eliminates the inherent gluing and peeling problems of packaging machinery. Therefore, EVA hot melt adhesive can be used in the packaging industry in the fields of cardboard and cardboard boxes, cement bags, labeling, food packaging, protective packaging, and packaging container sealing.   EVA hot melt adhesive is also used in the manufacture of electrical appliances such as televisions, air conditioners, refrigerators, as well as the shoemaking industry, PET blow molding bottles, cigarette filter winding, outer packaging tear strips, cable joint sealing, oil pipeline anti-corrosion and other fields.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com   ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.

EVA hot melt adhesive is a solvent-free, water-free, 100% solid fusible polymer. It is solid at room temperature and becomes a liquid adhesive that can flow and has a certain viscosity when heated and melted to a certain degree. It is light brown translucent or white after melting.   EVA hot melt adhesive is mainly made of the following four components: base resin, namely EVA resin, tackifying resin, wax, antioxidant, and a small amount of filler can be added in some occasions to increase the gap filling and reduce costs.   EVA hot melt adhesive has the following characteristics: (1). It has fast curing, low pollution, strong adhesion, and the adhesive layer has certain flexibility, hardness, and toughness; (2). After the adhesive liquid is applied to the adherend and cooled and solidified, the adhesive layer can be heated and melted again to become an adhesive body and then bonded to the adherend, with a certain degree of re-adhesion; (3). When using, just heat and melt the hot melt adhesive into the required liquid state and apply it to the adherend. After pressing, the bonding and curing can be completed within a few seconds, and the hardening, cooling and drying can be achieved within a few minutes.   The type of EVA determines the cohesive strength, flexibility, adhesion to the substrate and processability of the hot melt adhesive. For hot melt adhesive, the following properties of EVA should be paid attention to: molecular weight and its distribution, vinyl acetate (VA) content, crystallinity, softening point, melting point, melt index (MI) and melt viscosity, etc., because these properties directly affect the various properties of hot melt adhesive.   As the melt index of EVA increases, its strength, hardness, softening point and viscosity all decrease regularly; and the more VA content in EVA, the greater the elongation at break and the lower the hardness. In addition, when the VA content exceeds 30%, although the adhesion to polar and various non-porous non-polar substrates is improved, this EVA polymer is incompatible with wax, which is a point to be noted when designing hot melt adhesive formulas. In a formula, it is often necessary to use EVA with different MI or EVA with different VA content to obtain satisfactory comprehensive performance.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.

EVA resin is short for ethylene acetate-ethylene resin, which is a polymer made of ethylene acetate and ethylene monomer. According to the different contents of ethylene acetate, the copolymers of ethylene and ethylene acetate were divided into EVA resin, EVA rubber and VAE emulsion. .Products containing less than 40% vinyl acetate are EVA resins.    EVA resin has good softness and shock-absorbing properties. It is one of the materials widely used in the footwear manufacturing industry and can be used to make soles, insoles, uppers and other components. It is also often used as a cushioning material, such as knee pads, wrist pads, and ankle pads in sporting goods, as well as car seat pads, motorcycle seat pads, etc.   EVA resin can be molded through various processing methods, such as extrusion, injection, calendering, etc., and it also has shock-absorbing properties. It is an excellent packaging material such as protective film, liner, protective cover, etc. to protect items during transportation and storage. No damage is caused during the process.   The chemical resistance of EVA resin can resist the erosion of many chemical substances. In medicine, EVA resin is often used to make medical instruments and equipment, such as surgical instruments, medical tapes, gloves, etc. It has good chemical resistance and transparency, and meets hygiene and health requirements. It is also an insulating material for electronic products, such as cable insulation tubes, insulating gaskets, etc. It can also be used as a protective material for batteries, with excellent chemical resistance and heat insulation properties.   In terms of building materials, EVA resin can be used as building materials, such as sound insulation panels, heat insulation panels, etc. It has good sound absorption, heat insulation and weather resistance properties, and can improve the comfort of buildings.   Agricultural use EVA resin can be used as agricultural covering film. It has good weather resistance and light transmittance, and can protect crops from bad weather.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.

EVA film is a thermosetting and sticky film, mainly used in the middle of laminated glass. It has the characteristics of high transparency, high adhesion, good durability and easy storage. ‌ ‌High transparency allows light to penetrate better, reducing light energy loss and improving photoelectric conversion efficiency.   ‌High adhesion, able to firmly bond various materials, effectively ensuring the stability between components.   ‌Good durability, able to resist high temperature, moisture, ultraviolet rays and other environmental factors, ensuring long-term use.   ‌Easy to store, it can be stored at room temperature and is not affected by humidity and water absorption.   ‌Low melting point, easy to flow, suitable for lamination process of various glass, such as patterned glass, tempered glass, curved glass, etc.   Strong sound insulation effect. Compared with PVB film, EVA film has stronger sound insulation effect, especially for high-frequency sound.   Due to various excellent properties, EVA film is widely used in current components and various optical products, especially playing an important role in the packaging of solar photovoltaic modules.‌Solar photovoltaic module packaging, EVA film is used to fix solar cells and provide insulation protection, optical coupling, and provide moderate mechanical strength and heat conduction paths.   In recent years, with the rise and development of the global photovoltaic industry, the market demand for EVA has increased year by year, which has broad market prospects. There is also great room for improvement in the domestic EVA film market.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.

Vinyl acetate-ethylene copolymer emulsion is a polymer emulsion made of vinyl acetate and ethylene as basic raw materials, referred to as VAE emulsion or EVA emulsion in English. Since its introduction in 1965, it has been widely used in adhesives, building materials, coatings, papermaking, fabric processing, tobacco, packaging and other fields due to its excellent adhesion, permanent flexibility, good acid and alkali resistance and other properties.   In order to improve the performance of VAE emulsion and expand its application range, a lot of fruitful modification research has been done to improve the water resistance, mechanical strength, heat resistance, adhesion, curing speed and other aspects of VAE emulsion. These modification studies are mainly focused on the following directions: additive method, copolymerization method, composite modification method and blending method. Among them, the blending method is a method of physically blending VAE emulsion with one or more polymer solutions or emulsions to form a multi-component system. The properties of the various components of the blending method can complement each other, thereby obtaining new materials with better performance or new properties, reducing costs while potentially expanding the application field of VAE emulsion, allowing VAE emulsion to play a greater application value.   Polymer solutions or polymer emulsions that are often blended with VAE emulsions include: rosin resin, phenolic resin, urea-formaldehyde resin, terpene resin, polyurethane emulsion, acrylic emulsion, styrene-acrylic emulsion, vinyl acetate emulsion, styrene-butadiene emulsion, etc. Since VAE emulsion has good miscibility with a variety of emulsions, blending is the simplest and most direct way to achieve complementary properties of the blended components and obtain new properties.   PVAc emulsion was used to modify VAE emulsion, and at the same time, thickening resin and additives were used to synthesize an adhesive suitable for bonding non-polar plastic materials. The addition of thickening resin significantly improved the bonding strength of the emulsion; the addition of acidic metal salt crosslinking agent improved the water resistance of the system without affecting the stability of the emulsion.   VAE emulsion was modified by blending pure acrylic emulsion, acetic acid acrylic emulsion, silicone acrylic emulsion, styrene acrylic emulsion and VAE emulsion to prepare adhesive. The results show that the VAE emulsion modified by acrylate emulsion has been greatly improved in bonding performance and peel strength. Among them, the adhesive obtained by using acetic acid acrylic emulsion to modify VAE emulsion has the best comprehensive performance, especially the most obvious improvement in high temperature adhesion.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.  

Vinyl acetate-ethylene copolymer (VAE) emulsion is the abbreviation of vinyl acetate-ethylene copolymer emulsion. It is a polymer emulsion formed by copolymerizing vinyl acetate and ethylene monomers with other auxiliary materials through emulsion polymerization.   White latex is a water-soluble adhesive, a thermoplastic adhesive produced by polymerization of vinyl acetate monomer under the action of an initiator. Usually called white latex or PVAC emulsion for short, the chemical name is polyvinyl acetate adhesive, which is synthesized from acetic acid and ethylene to vinyl acetate, with the addition of titanium dioxide (low-grade ones add light calcium, talc, and other powders). It is then made by emulsion polymerization. A thick milky white liquid.   VAE emulsion has the advantages of permanent softness, water resistance, low temperature resistance, fast bonding speed, high bonding strength, and is safe and non-toxic. VAE emulsion is widely used in adhesives, exterior wall insulation, building waterproofing, coatings, composite packaging materials, building cement mortar modification, non-woven fabric manufacturing, paper coating and general adhesive for various polar and non-polar materials. Access and other fields.   The characteristics of white latex include normal temperature curing, fast curing, high bonding strength, good toughness and durability of the bonding layer and not easy to age. White latex is a widely used water-soluble adhesive. It is mainly used in wood bonding, construction industry, coatings, etc. It is also used in furniture assembly, surface repair, etc.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.

VAE (ethylene-vinyl acetate copolymer) emulsion viscosity is an important quality indicator and has a significant impact on product mass transfer, heat transfer, fluid flow, emulsion stability and emulsion transportation. Monomer ratio, polymerization temperature, initiator, emulsifier system optimization, electrolyte additives, and storage conditions are all factors that affect the viscosity of VAE emulsion.   1. Monomer ratio The selection and proportion of monomers directly affect the viscosity and other properties of VAE emulsion. The ratio of ethylene to vinyl acetate (VAc) is particularly critical. Generally speaking, VAE emulsions with a VAc content of 70% to 95% have higher viscosity. Increased VAc content will increase the flexibility and elasticity of the emulsion, and will also increase the viscosity of the emulsion.   2.Polymerization temperature control Polymerization temperature is another important factor affecting the viscosity of VAE emulsion. Changes in temperature will affect the rate of free radical generation and the rate of polymerization. Generally speaking, within a suitable temperature range, an increase in temperature will speed up the polymerization reaction, causing the latex particles in the emulsion to grow rapidly, resulting in an increase in viscosity. However, too high a temperature may cause the emulsion to gel, affecting its quality and stability.   3.Initiator The amount and type of initiator have a significant impact on the viscosity of VAE emulsions. Initiators mainly affect the rate of polymerization. When the amount of initiator is large, the polymerization reaction is fast, the number of generated latex particles increases, and the viscosity of the emulsion increases. However, excessive initiator may cause the reaction to be too fast and difficult to control, resulting in reduced emulsion performance. Different types of initiators generate different types of free radicals during the reaction and have different effects on the viscosity of the emulsion.   4. Emulsifier system optimization The selection and dosage of emulsifier are crucial to the stability and viscosity of VAE emulsion. The main function of emulsifier is to reduce the surface tension of emulsion and promote monomer dispersion and emulsion formation. Appropriate emulsifier concentration and anionic/nonionic emulsifier ratio can improve the stability of the emulsion and also affect the viscosity of the emulsion. The degree of polymerization and alcoholysis of protective colloids such as PVA (polyvinyl alcohol) also significantly affect the viscosity of the emulsion. The higher the degree of polymerization of PVA, the greater the viscosity of the emulsion; the higher the degree of alcoholysis, the lower the viscosity of the emulsion.   5.Electrolyte additives The addition of electrolyte additives can affect the viscosity and stability of VAE emulsions. Some electrolyte additives can compress the electric double layer of latex particles and reduce the electrostatic repulsion between latex particles, thereby increasing the viscosity of the emulsion. However, excessive amounts of electrolyte additives may cause aggregation in the emulsion, affecting its performance.   The factors that affect the viscosity of VAE emulsions include reaction time and rate, PH value, storage conditions and stability. In actual production and application, these factors need to be reasonably adjusted according to specific needs and conditions to obtain VAE emulsion products with excellent performance.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com ElephChem Holding Limited, professional market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.